sp sp sp sp
sp1 sp2 sp3 logo
HomeProductsSupportSalesCompany
 

Application Notes


AN-9701: IGBT drivers correctly calculated

==> This application note is replaced by AN-1001 (see below)


AN-9901: Design of driver cards with SCALE drivers

Notes for implementing IGBT driver cards

You should read this application note if you wish to design driver cards with SCALE drivers…


AN-9902: Two and four-quadrant DC/DC converters with SCALE drivers

Notes for the use of dead-time logic

Special application of SCALE drivers...


AN-0801: Mechanical Handling of CONCEPT Drivers

This application note describes the correct mechanical handling of CONCEPT drivers. It particularly points out that no excessive mechanical force should be applied to transformers.


AN-0901: Methodology for Controlling Multi-Level Converter Topologies with SCALE-2 IGBT Drivers

This application note describes the methodology for controlling multi-level converter topologies with SCALE-2 IGBT drivers in case of a fault. Multi-level converters use series-connected IGBTs to increase both the amplitude and switching frequency of the converter output voltage.


AN-0904: Direct Paralleling of SCALE-2 Gate Driver Cores

Parallel-connected IGBTs are conventionally driven by a common driver, with individual gate and emitter resistors for each IGBT. An alternative approach to driving parallel-connected IGBT modules is to use an individual driver for each module.


AN-1001: IGBT and MOSFET Drivers Correctly Calculated

This application note describes the calculation of the gate drive performance figures required for a given application. The values as derived from this application note serve as a base for selecting the most appropriate driver.


AN-1101: Application with SCALE-2 Gate Driver Cores

This application note will highlight important design rules and help to speed up the development time by showing detailed examples about how to design successfully IGBT drivers for industrial and traction applications. Considered SCALE-2 driver cores are: 2SC0108T, 2SC0435T, 2SC0650P and 1SC2060P.


Descriptions and Application Manuals


First Generation SCALE Drivers



SCALE-2 Driver Cores



SCALE-2 Plug-and-play Drivers



EiceMELTER


 
ft1
© 1998-2012 CT-Concept Technologie AG. All Rights Reserved | Terms of Use | Contact Us |     |Deutsch|