2SD300C17 EiceMELTER

Dual Channel High-quality and Low-cost SCALE-2 Driver Core

Second source for Infineon 2ED300C17-S

Highly integrated SCALE-2 technology

30A gate current and 2 x 4W drive power

Short Description

The new SCALE-2 dual-driver core 2SD300C17 is a second source to Infineon's 2ED300C17-S. The driver is fully pin and function-compatible to the 2ED300C17-S and was designed for applications in which high reliability is expected.

Advantages of the Technology

The use of CONCEPT's highly integrated SCALE-2 chipset allows 63% of the components to be dispensed with compared to the 2ED300C17-S. This advantage is impressively reflected in increased reliability (function and MTBF) with simultaneously lower costs. This advantage is impressively reflected in increased reliability at simultaneously minimized cost.

The 2SD300C17 combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, failure soft shut down, short pulse suppression as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel.

The driver provides a gate voltage swing of ±15V. An output current of 30A and 4W drive power is available per channel.

Its outstanding EMC with a dv/dt strength of more than 50V/ns allows safe and reliable operation in even the demanding industrial applications.

Key Data Overview

Parameter	Min	Typical	Max	Unit
Nominal supply voltage		15		V
Supply current @ f_IN 0Hz		79		mA
Supply current, full load		540		A
Output power per channel		4		W
Gate voltage		±15		V
Peak output current (gate current)	-30		+30	A
Switching frequency f_IN	0		60	kHz
Duty cycle	0		100	%
Turn-on delay		630		ns
Turn-off delay		490		ns
Short pulse supression (turn-on)		470		ns
Short pulse supression (turn-of)		300		ns
Deadtime halfbridge mode		1.35		us
Creepage distance primary-secondary	16.2		mm
Creepage secondary-secondary	14.2			mm
Clearance distance primary-secondary	16.2			mm
Clearance distance secondary-secondary	6.5			mm
Dielectric test voltage	5000			V_AC
Partial discharge extinction voltage	1768			V_peak
dv/dt immunity, input to output		50		kV/us
Operating temperature	-40		+85	°C