sp sp sp sp
sp1 sp2 sp3 logo
HomeProductsSupportSalesCompany
 

2SD315AI


MEDIUM/HIGH-POWER DUAL SCALE DRIVER CORE

Highly approved SCALE technology

The award-winning drive circuit for IGBTs

2SD315AI for 600V to 1700V IGBTs up to 800A
2SD315AI-25 for 2500V IGBTs up to 400A
2SD315AI-33 for 3300V IGBTs up to 200A


Short Description

The 2SD315AI series comprises highly approved 2-channel SCALE driver cores for IGBTs up to 1700V (optionally up to 3300V). Its gate current capability of ±15A is optimized for IGBTs from 200A to typically 800A. The two drive channels feature electrical isolation between the control electronics and the power section. The gate voltage is 0/+15V or ±15V.

Each channel is equipped with a programmable Vce monitoring function for protection against short circuit and overcurrent.

The driver is equipped with the award-winning CONCEPT SCALE driver chipset and can be operated in two modes: either with two independent driver channels or as a half-bridge driver with internal dead-time generation.

The integrated electrically insulated DC/DC converter supplies a drive power of 3W per channel.


Reliability

The 2SD315AI has been established on the market as an industrial standard since 1999. The driver has been tried and tested within hundreds of thousands of industrial and traction applications. The calculated MTBF according to MIL Hdbk 217F is 10 million hours at 40ºC. According to field data, the actual reliability is even higher.


Key Data Overview

Parameter Min Typical Max Unit
Nominal supply voltage   15   V
Supply current, without load (Idc+Idd)   42   mA
Supply current, full load Idc+Idd)     490 mA
Output power per channel     3 W
Efficiency of DC/DC converter   85   %
Delay time input to output, turn on   300   ns
Delay time input to output, turn off   350   ns
Switching frequency (Note 1) 0   100 kHz
Duty cycle 0   100 %
Gate voltage (bipolar gate drive)   +/-15   V
Gate voltage (unipolar gate drive)   0/+15   V
Peak output current (gate current) -15   +15 A
dv/dt immunity, input to output   100   kV/us
Creepage distance   21   mm
Dielectric test voltage     4000 Vac
Operating temperature -40   +85 °C

Note 1: Switching frequency >100kHz possible. Please contact support for further information.


Isolation Data

Partial discharge extinction voltage to IEC1287 Min Unit
2SD315AI 1700 VAC(peak)
2SD315AI-25 2500 VAC(peak)
2SD315AI-33 3300 VAC(peak)

Data Sheets

IGBT collector voltage Driver type no.
600V...1700V

2SD315AI

2500V

2SD315AI-25

3300V

2SD315AI-33

For data sheets click into tables, column "Driver type no."


Important Product Documentation



Related Application Notes



Related Technical Papers


 

     Click into picture for full view



Applications

  • Traction
  • Power converters
  • Motor drives
  • Switched-mode power supplies
  • Radiology and laser technology
  • High frequency applications
  • Wind power converters
  • Research

Key Features

  • Highly approved SCALE technology
  • Suitable for IGBTs up to 3300V
  • Interface with 5V...15V logic level
  • Schmitt-trigger inputs
  • Short-circuit and overcurrent protection
  • Supply undervoltage lockout
  • Isolated DC/DC converter
  • Signal transformer isolation
  • Isolated status feedback
  • Extremely reliable, long service life
  • Can be soldered directly onto a PCB board

Related Links


ft1
© 1998-2008 CT-Concept Technologie AG. All Rights Reserved | Terms of Use | Contact Us |     |Deutsch|