2SP0115T

Dual-Channel SCALE™-2 Plug-and-Play Driver for 17mm IGBT Modules

SCALE™-2 Technology
Low-cost, full function across the range
Embedded Paralleling Capability

Applications

Key Benefits

Compact driver solution for 17mm dual IGBT modules with an electrical interface for 2-level, 3-level and multilevel converter topologies with paralleling capability.

Description

2SP0115T is a very low-cost, ultra-compact driver series for 17mm as EconoDUALTM IGBT modules. As a member CONCEPT’s plug-and-play driver family, it satisfies industry’s requirements for optimized electrical performance and noise immunity. 

The highly integrated SCALE-2 chipset reduces the component count by 80% compared to conventional solutions, thus significantly increasing reliability and reducing cost. 

The use of SCALE-2 technology also means that 2SP0115T devices are complete two-channel IGBT drivers equipped with DC/DC converters, short-circuit protection, Advanced Active Clamping and supply-voltage monitoring. 

Users need only solder them onto the corresponding IGBT module. The system can then be put into immediate operation with no further development or matching engineering effort. This enables short design cycles to be realised without compromising overall system efficiency. 

The embedded paralleling capability allows simple inverter design for higher power ratings. 

Specifically adapted drivers are available for all module types. The DIC20 electrical interface is very simple and easy to use. 

Driving Parallel-Connected IGBTs

The driver allows direct parallel connection of any number of 17mm modules with individual drivers. This new, pioneering concept makes it practical for the first time to build a converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort.

Electrical Interface DIC20

The 2SP0115T driver series is equipped with DIC20 electrical interface and is fully compatible with the PrimePACKTM driver series 2SP0320T. The DIC20 electrical interface is very simple and easy to use.

The driver has the following terminals:

  • Power supply and GND terminals
  • 2 x drive signal inputs
  • 2 x status outputs (failure returns)
  • 1 x mode selection (half-bridge mode / direct mode)
  • 1 x input to set the blocking time

All inputs are ESD-protected and all digital inputs have Schmitt-trigger characteristics. For more details, check the product documentation.

A version with extended operating temperature range of -40°C...85°C (2SP0115T2B0) can also be supplied.

Key Features

  • Blocking voltages up to 1700V
  • Interface for 3.3V...15V logic level
  • Very short delay time of <100ns
  • Small jitter of ±4ns
  • +15V (regulated)/-8V gate driving
  • Direct and half-bridge modes
  • Embedded paralleling capability
  • 2-level and multilevel topologies
  • IGBT short-circuit protection
  • Advanced Active Clamping
  • Isolated DC/DC converter
  • Supply under-voltage lockout
  • Safe isolation to EN50178
  • UL compliant
  • Superior EMC
  • Reliable, long service life

Basic Schematic

Data Sheets

Driver type no. IGBT Voltage (V) IGBT Ic (A) Manufacturer
2SP0115T2Ax-06 600 Any
-20°C...85°C
2SP0115T2Ax-FF450R06ME3 600 450 Infineon
2SP0115T2Ax-FF600R06ME3 600 600 Infineon
2SP0115T2Cx-06 600 Any
-40°C...85°C, 15V logic, 10k pull-up resistor on SOx
2SP0115T2Ax-12 1200 Any
-20°C...85°C
2SP0115T2Ax-2MBI225VN-120-50 1200 225 Fuji
2SP0115T2Ax-2MBI300VN-120-50 1200 300 Fuji
2SP0115T2Ax-2MBI450VN-120-50 1200 450 Fuji
2SP0115T2Ax-2MBI600VN-120-50 1200 600 Fuji
2SP0115T2Ax-CM200DX-24S 1200 200 Mitsubishi/Powerex
2SP0115T2Ax-CM300DX-24S 1200 300 Mitsubishi/Powerex
2SP0115T2Ax-CM450DX-24S 1200 450 Mitsubishi/Powerex
2SP0115T2Ax-FF150R12ME3G 1200 150 Infineon
2SP0115T2Ax-FF225R12ME4 1200 225 Infineon
2SP0115T2Ax-FF300R12ME3 1200 300 Infineon
2SP0115T2Ax-FF300R12ME4 1200 300 Infineon
2SP0115T2Ax-FF450R12ME3 1200 450 Infineon
2SP0115T2Ax-FF450R12ME4 1200 450 Infineon
2SP0115T2Ax-FF600R12ME4 1200 600 Infineon
2SP0115T2Cx-12 1200 Any
-40°C...85°C, 15V logic, 10k pull-up resistor on SOx
2SP0115T2Ax-17 1700 Any
-20°C...85°C
2SP0115T2Ax-2MBI300VN-170-50 1700 300 Fuji
2SP0115T2Ax-2MBI450U4N-170-50 1700 450 Fuji
2SP0115T2Ax-2MBI450VN-170-50 1700 450 Fuji
2SP0115T2Ax-2MBI550VN-170-50 1700 550 Fuji
2SP0115T2Ax-FF225R17ME4 1700 225 Infineon
2SP0115T2Ax-FF300R17ME3 1700 300 Infineon
2SP0115T2Ax-FF300R17ME4 1700 300 Infineon
2SP0115T2Ax-FF450R17ME3 1700 450 Infineon
2SP0115T2Ax-FF450R17ME4 1700 450 Infineon
2SP0115T2Ax-FF600R17ME4 1700 600 Infineon
2SP0115T2Cx-17 1700 Any
-40°C...85°C, 15V logic, 10k pull-up resistor on SOx

Manuals

Application Notes

Downloads

AttachmentSize
3D STP File426.43 KB
Product Finder