解决方案搜寻 技术支持

其它工业领域

Industrial IconPower Integrations为工业应用开发IGBT驱动器的历史超过25年,提供适用于各种多样化的工业应用的标准产品,其中包括焊接、UPS系统、感应加热、x射线和其他应用。广泛的市场接受和现有的UL认证可为用户带来最新的设计,缩短上市时间。也可应请求提供定制设计。

参考设计

相关产品

Related Products
产品
数据手册
拓扑结构
产品描述
Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2
Description

适用于单个LV100(Mitsubishi)、XHP™ 2(Infineon)、HPnC(Fuji)及同类半导体模块(最高2300V阻断电压)操作的双通道即插即用门驱动器,具有电气接口、NTC读出和内置DC-DC电源。

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2
Description

Gate Driver for Driving 62mm SiC-MOSFET and Si-IGBT modules up to 1700 V via Electrical Interface

Topology 2-level Voltage Source
Description

用于驱动半桥功率模块的双通道即插即用型门极驱动器,通过电气接口实现负温度系数(NTC)温度检测

Topology 2-level Voltage Source
Description

用于EconoDUAL™或其他等效17 mm模块的双通道即插即用型门极驱动器,特别适用于3至5MW范围的海上风力涡轮机

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1
Description

用于耐压在3.3kV以内的100x140mm IGBT模块的即插即用型门极驱动器,特别适用于电动火车和有轨电车

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

适配130x140mm单通道IGBT大功率(IHM)模块的紧凑型单通道智能即插即用门极驱动器

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

单通道SCALE-2即插即用型门极驱动器,适用4500V Press-Pack IGBT (PPI)模块

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

即插即用门极驱动器,用于并联高达 3.3 kV 的 100x40 mm IGBT/SiC 模块,包括一个中央绝缘主控制(IMC) 2SI0400T2xxC和多达四个模块适配型门极驱动器(MAG) 2SM0120D2xxC ,以及一个电缆套件。

Topology Any
Description

适用于SCALE-iDriver门极驱动器IC的DC/DC变压器可提供1200V加强绝缘

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

最大8A的单通道SiC MOSFET门极驱动器,可提供高级有源钳位和1200V加强绝缘

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

单通道IGBT/MOSFET门极驱动器,可提供耐压650 V的加强绝缘

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

最大5A的单通道IGBT/MOSFET门极驱动器,可为耐压1200V的IGBT和MOSFET提供加强绝缘

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

具有先进的安全和保护功能的电气绝缘的单通道门极驱动器IC

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

适用于90 kW-500 kW逆变器的最小IGBT门极驱动器,SCALE-2+技术,适用于1200 V IGBT驱动器的电气绝缘方案,高级有源钳位或SSD功能

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

单通道SCALE-2驱动核,最高的集成水平,集成DC/DC电源和光纤接口的灵活的4.5 kV和6.5 kV门极驱动器

Topology 2-level Voltage Source
Description

双通道SCALE-2+驱动核,最高的集成水平,适用于10至75kVA的逆变器设计,以最经济的方式完整通过安全认证

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

用于4.5kV IGBT的单通道SCALE-2即插即用型驱动器、主/从结构支持驱动器直接并联

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

单通道SCALE-2即插即用型驱动器,具有主/从操作功能,可驱动3300 V到6500 V的IGBT(需配备外置的DC/DC电源)

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

用于PrimePACK™ IGBT模块的双通道SCALE-2即插即用型驱动器,电气或光纤接口,支持驱动器直接并联

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

用于17mm IGBT模块的双通道SCALE-2即插即用型驱动器,功能齐全,支持驱动器直接并联

Topology 2-level Voltage Source
Description

双通道SCALE-2驱动核,最高的集成水平,兼容Infineon 的2ED300C17-S驱动器,30 A门极电流,2 x 4 W驱动功率

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

用于3.3 kV IGBT的双通道SCALE-2驱动核,最高的集成水平,超紧凑,高电压,高功率,35 A门极电流,2 x 5 W输出功率

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

采用平面变压器的单通道SCALE-2驱动核,最高的集成水平,最高的功率密度,针对大功率和高频应用,50 A门极电流,2 x 6 W输出功率

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

双通道SCALE-2+驱动核,适用2SC0435T2F1-17、2SC0435T2G1-17和2SC0435T2H0-17,具有最高集成度,超紧凑,高质量;35 A门极电流,2 x 4 W输出功率

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

双通道SCALE-2+驱动核,最高的集成水平,超紧凑,高质量,8 A门极电流,2 x 1 W输出功率

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

采用平面变压器的单通道SCALE-2驱动核,最高的集成水平,驱动电流60 A,用于驱动并联的大功率IGBT模块,输出功率20 W,用于最高500 kHz的高频应用

补充文件